Stabilizer Shaft Replacement - GMC chevrolet camaro 2000 Service Manual

3-50 Rear Suspension
1
483066
490650
490653
Suspension
10. Install the center support bearing (2) bolts to the
torque arm (1), if equipped with a two piece
propeller shaft.
Tighten
Tighten the center support bearing (2) bolts to
50 N·m (37 lb ft).
11. Remove the adjustable jack stand.
12. Lower the vehicle.
Stabilizer Shaft Replacement
Removal Procedure
1. Remove the stabilizer shaft link. Refer to Stabilizer
Shaft Link Replacement.
2. Remove the stabilizer shaft insulator clamp
nuts (2) and bolt (1).
3. Remove the stabilizer shaft insulator clamp (1 ).
(
(