GMC chevrolet camaro 2000 Service Manual page 141

1 a44 Heating, Ventilation and Air Conditioning
HVAC
J 23128-A
210205
J 9553-01
237127
Important: Securely hand-tighten the handle of the
J 23128-A. Do not use a wrench or pliers.
5. Fully engage the knurled tangs of the J 23128-A
into the recessed portion of the seal by turning
the handle clockwise.
6. Remove the seal from the compressor using a
rotary-pulling motion. Discard the seal.
7. Remove the .seal 0-ring from the compressor
neck using the. J 9553-01. Discard the seal 0-ring.
8. Inspect the shaft and the inside of the compressor
neck again for dirt and foreign material.
9. Ensure that the shaft and the inside of the
compressor neck are perfectly clean prior to
installing new parts.
(
(
(