Table of Contents
Advertisement
)
General Information
Keypad Reference
95605
A/B:
Switches the display between the A Input and
the B Input. You must use Input A when strobe
balancing.
AVG:
Switches the display between the
non-averaging mode and the averaging mode. The
non-averaging mode is more sensitive to sudden
vibration variations. When in the averaging mode, the
word AVG appears at the top of the display.
RPM1HZ:
Switches the frequency display between
RPM and Hz.
.
Vibration Diagnosis and Correction
0-85
FREEZE:
Locks the display data at that moment and
displays the word FRZ at the top of the screen. This
key operates in the active display or during playback.
Pressing the FREEZE key again or pressing the
EXIT key unlocks the display.
RECORD:
Places the EV A in the record mode.
Pressing the EXIT key will return the screen to the
active display.
PLAYBACK:
Places the EV A in the playback mode
in order to view vibration information that was
previously recorded. Pressing the EXIT key will return
the key screen to the active display.
Numeric Keys (0-9):
The numbered keys are used
in order to select one of ten snapshot tag numbers
between O and 9 when recording or playing back
information.
Arrow Keys:
The arrow keys are used in order to
move through the individual frames of a snapshot
during a freeze in the playback mode. Pressing the UP
arrow moves forward one frame and pressing the
DOWN arrow moves backward one frame.
ENTER:
Once the EVA is in the record mode and
you have selected a snapshot tag number, press
ENTER in order to start recording.
STROBE:
Places the EV A in the strobe mode for
driveshaft balancing and diagnosis. Pressing the EXIT
key will return the screen to the active display.
YES and NO:
Used in order to select a filter range
when in the strobe balancing mode.
EXIT:
Returns the screen to the active display when
the EVA is in the freeze mode, the record mode,
the playback mode, or the strobe mode.
Advertisement
Chapters
Table of Contents
