GMC chevrolet camaro 2000 Service Manual page 547

5-74 Disc Brakes
581465
581466
171985
Brakes
3. Remove the piston boot (2).
4. Remove the piston seal (1).
5. Remove the brake caliper bleed screw cap.
6. Remove the brake caliper bleed screw (1 ).
7. Inspect the brake caliper bore and piston seal
groove for scoring and corrosion. If badly scored
or corroded around the piston seal area,
replace the brake caliper housing.
8. Inspect the brake caliper mounting bracket guide
surfaces for corrosion and wear. Remove and
replace the brake caliper mounting bracket
if necessary.
9. Clean all the residue from the brake pad guiding
surfaces on the brake caliper housing and the
brake caliper mounting bracket.
10. Clean all the parts not included in the repair kit
with denatured alcohol.
11. Dry all the parts with filtered unlubricated
compressed air.
12. Blow out all passages in the brake caliper housing
and the brake caliper bleeder valve.
(
(