GMC chevrolet camaro 2000 Service Manual page 291

2-44 Power Steering System
423421
423421
423417
Steering
Assembly Procedure
1. Inspect the cylinder lines (1) for the
following items:
• Cracks
• Dents
• Damage to the threads
2. Replace the parts as needed.
3. Install the new 0-ring seals (1) to the valve end of
the cylinder lines.
Important:
Carefully align the threads on all of the
fittings.
4. Finger tighten the fittings in order to avoid
stripping and cross-threading the fittings.
5. Install the cylinder line assemblies (1) to the gear
assembly (2).
Notice: Refer to Fastener Notice in Cautions and
Notices.
Tighten
Valve end fittings to 16.9 N-m (12.6 lb ft). Cylinder
end fittings to 27 N·m (20 lb ft).
Important:
Flush and bleed power steering system
(hoses, reservoir and cooler lines) with power steering
fluid GM Part #1050017 (or equivalent meeting GM
Specification #9985010).
6. Flush and bleed power steering system. Refer to
Bleeding Power Steering System.
(