Adjuster Assembly Replacement - GMC chevrolet camaro 2000 Service Manual

\
/
Brakes
Adjuster Assembly Replacement
Removal Procedure
Important: The adjuster assembly cables must always
be adjusted each time the adjuster assembly is
removed and/or replaced to ensure optimum system
performance. Refer to Cable Adjustment Procedure.
1. Remove the adjuster assembly splash cover.
2. Remove the cable cam cover.
3. Disconnect the adjuster assembly electrical
connector.
4. Remove the nuts attaching the adjuster assembly
to the bracket.
5. Remove the cables from the adjuster assembly.
\
Antilock Brake System 5-239
4
1
213434
6
213407