Repair Instructions; Electronic Brake Control Module (Ebcm) Replacement - GMC chevrolet camaro 2000 Service Manual

Brakes
Repair Instructions
Electronic Brake Control Module (EBCM)
Replacement
Removal Procedure
Notice: To prevent equipment damage, never connect
or disconnect the wiring harness connection from
the EBCM with the ignition switch in the ON position.
4
1. Turn the ignition switch to the OFF position.
2. Pull out lock tab from the EBCM harness
connector.
3. Disconnect the EBCM harness connector (6).
4. Disconnect the pump motor connector (3) at the
bottom of the EBCM.
5. Remove the six EBCM to BPMV screws (2) and
discard.
Important: Be careful not to damage seal. Do not pry
apart using a tool.
Important: Care must be taken not to damage the
solenoid valves when the EBCM is removed from
the BPMV.
6. Separate the EBCM (1) from the BPMV (5) by
gently pulling apart until separated.
3
4
Antilock Brake System 5-233
213428
2
3
213438