GMC chevrolet camaro 2000 Service Manual page 223

1-126
HVAC Systems - Manual
282916
282918
1 2 3
282917
HVAC
Control Assembly Replacement
Removal Procedure (
1. Remove the accessory trim plate. Refer to Trim
Plate Bezel Replacement - IP Cluster (Chevrolet)
or Trim Plate Bezel Replacement - IP Cluster
(Pontiac) in Instrument Panel, Gauges and
Console.
2. Remove the heating, ventilation. and ai.r
conditioning (HVAC) control bolts. ·
3. Gently pull the HV AC control out from the
instrument panel (IP) far enough to access
the following connections:
., Vacuum
" Electrical
O
Temperature cable
4. Disconnect the vacuum harness conneGtor from
the vacuum selector valve.
5. Disconnect the following electrical connectors
from the HV AC control:
e
HVAC mode switch (1)
" HVAC control illumination (2)
" HV AC blower switch (3)
" Rear defogger (4)
6. Remove the temperature control cable (5) from
the control.
When releasing the control cable clips, use a
small screwdriver to gently pry the cable from the
control.
(