Repair Instructions; Drive Belt Replacement - GMC chevrolet camaro 2000 Service Manual

Engine
Repair Instructions
!
Drive
Belt Replacement
Removal Procedure
)
. 1. Position a hex-head socket on the belt tensioner
pulley bolt.
2. Rotate the drive belt tensioner (2) clockwise to
relieve the tension on tfle drive belt (1 ).
3. Remove the drive belt (1) from the tensioner (2)
and pulleys.
4. Clean and inspect the belt surfaces of all the
pulleys.
Installation Procedure
1. Route the drive belt
(1)
around the pulleys.
2. Position a hex-head socket on the belt tensioner
pulley bolt.
3. Rotate the drive belt tensioner (2) clockwise to
relieve the tension.
4. Install the drive belt (1) onto the drive belt
tensioner (2).
5. Inspect the drive belt (1) to ensure that the belt is
properly aligned into the grooves of the pulleys.
Engine Mechanical - 3.8L 5.;47
41363
41363