Brake Hose Replacement - Rear; (With Traction Control) - GMC chevrolet camaro 2000 Service Manual

Brakes
Brake Hose Replacement - Rear
(With Traction Control)
Removal Procedur.e
1. Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
Information.
2. Clean all dirt and foreign material from the brake
hose and the brake pipe fittings.
3. Remove the right rear brake pipe (6) or the left
rear brake pipe (7) from the rear brake
hoses (3 or 4).
• Use a backup wrench on th.e brake hose
fittings.
• Do not bend the rear brake hose bracket (10)
or the brake pipes (6 or 7).
4. Rernove the rear brake pipe clips (8 or 9) from
the brake hose bracket (10) and the rear brake
hoses (3 or 4),
5. Remove the left rear brake pipe (2) or the
right rear brake pipe (5) from the rear brake
hoses (3 or 4).
• Use a backup wrench
cm
the brake hose
fittings.
• Do not bend the rear brake hose bracket (1) or
the rear brake pipes (2 or 5).
6. Remove the rear brake pipe clips (8 or 9) from
\ the brake hose bracket (
1)
arid the rear brake
) hoses (3 or 4).
7. Remove the rear brake hqses (3 or4).
)
Hydraulic
Brakes 5-43
182798