Remote Power Steering Fluid Reservoir - GMC chevrolet camaro 2000 Service Manual

2-18 Power Steering System
443673
290572
Steering
Important: Fluid must be free from bubbles and foam.
Be aware of periodic bubbles that indicate a loose
connection or leaking 0-ring seal in the return hose or
the pressure hose.
Fluid must be free from discoloration.
7. Observe the fluid.
8. If condition persists, replace the following parts:
• The return hose clamps
" The return hose 0-rings
" The pressure hose 0-rings
• The gear cylinder line 0-rings
• The reservoir to pump 0-ring
9. Repeat the bleed procedure from the beginning.
10. Drive the vehicle approximately 16 kilometers
(1 O miles) to warm the system to operating
temperature. Evaluate vehicle on a smooth flat
surface.
11. Verify the following conditions:
• There is smooth power assist.
" The vehicle operates quietly.
• The pump maintains the proper fluid level.
• There is no leaking in .the steering system.
• The fluid is free of foam or discoloration.
Remote Power
Steering Fluid
Reservoir
Replacement
Removal Procedure
1. Place a drain pan under the reservoir (1 ).
2. Remove the cap from the reservoir (1 ).
3. Remove the reservoir (1) from the bracket (2).
4. Disconnect the reservoir and outlet hoses (4, 6)
from the reservoir (1 ).
(
(
(