Steering
Notice: Refer to Fastener Notice in Cautions and
J
Notices.
)
8. Install 3 pan head 6-lobe socket tapping screws:
(1) at 12 o' clock position first, (3) at 8 o' clock
position second, and (2) at 3 o'clock position third.
Tighten
Tighten the
3
pan head 6-lobed socket screws to
9 N-m (80 lb in).
9. Mount the cruise control connector (3) on the
base plate (1).
10.
Install the column housing cover end cap
(2).
11. Install the steering column lock cylinder set. Refer
to Steering Column Lock Cylinder Set - Assemble
- Off Vehicle.
Steering Shaft, Lower Bearing, and Jacket
- Disassemble - Off Vehicle
Disassembly Procedure
1. Remove the steering column housing assembly.
Refer to Steering Column Jacket - Disassemble -
Off Vehicle.
2. Remove the pivot and pulse switch assembly.
Refer to Windshield Wiper and Washer Switch
Assembly - Disassemble - Off Vehicle.
3. Remove the following 4 items from the steering
column jacket assembly:
3.1. Remove the lower bearing adapter clip (1 ).
3.2. Remove the bearing adapter (2).
3.3. Remove the bearing assembly (3).
3.4. Remove the lower bearing adapter (4).
Steering Wheel and Column - Ti.It 2-89
2
3
343832
i - - - 2
343830
569761