Wheel Speed Sensor Jumper Harness; Replacement (Front Right) - GMC chevrolet camaro 2000 Service Manual

)
)
Brakes
Installation Procedure
1. Install the Wheel Speed Sensor (1 ).
2. Install the Wheel Speed Sensor attaching bolt.
Tighten
Tighten the bolt to 1
o
N·m (89 lb.in)
3. Install the wheel speed sensor connector (2).
Wheel Speed
Sensor Jumper Harness
Replacement (Front Right)
Removal Procedure
1. Remove the wheel speed sensor connector.
2.
Remove the jumper harness from the
retaining clip.
3. Remove the grommet retainer at the inner fender.
4. Remove the harness cover from the right
slrut tower.
5. Remove the upper jumper harness connector.
6. Pull the grommet through inner fender pass-thru
and remove jumper harness.
Installation Procedure
1. Route the new jumper harness through inner
fender pass-thru.
2. Install the upper jumper harness connector.
3. Install the harness cover on the right strut tower.
4. Install the grommet retainer at the inner fender.
5. Install the jumper harness from the retaining clip.
6. Install the wheel speed sensor connector.
Antilock Brake System 5-243
213413
213395
213395