GMC chevrolet camaro 2000 Service Manual page 816

Engine
4. Install the heater hoses to the drive belt tensioner.
5. Install the generator. Refer to Generator
Replacement (3.8 L} in Engine Electrical.
6. Install the drive belt. Refer to Drive Belt
Repla<Jement.
7.
Refill the engine coolant. Refer to Draining and
Filling Cooling System (3.8 L} in Engine Cooling.
Drive Belt Idler Pulley Replacement
Removal Procedure
1 . Remove the serpentine drive belt. Refer to Drive
Belt Replacement.
2.
Remove the drive belt idler pulley bolt(1 ).
3. Remove the drive belt idler pulley (2).
Installation Procedure
1. Install the drive belt idler pulley (2).
Notice: Refer to Fastener Notice in Cautions and
Notices.
2.
Install the drive belt idler pulley bolt (1 ).
Tighten
Tighten the drive belt idler pulley bolt (1) to
50 N·m (37 lb ft).
3. Install the serpentine drive belt. Refer to Drive
Belt Replacement.
Engine Mechanical - 3.8l 6-49
282933
1
2
500350
1
2
500350