Engine
19. Remove the positive cable from the engine
mount stud.
)
0
Remove the battery positive cable nut (2).
)
• Remove the harness clamp from the stud.
• Remove the RF (Radio Frequency)
ground strap.
20.
Remove the left engine mount bracket bolts
(3).
21. Remove the left engine mount bracket stud (2)
and the engine mount bracket
(1 ).
22. Visually Inspect the rubber portions of the engine
mount for damage.
Installation Procedure
1. Install the left engine mount bracket (1) and
stud (2) to the engine block.
Notice:
Refer to
Fastener Notice
in Cautions and
Notices.
2. Install the left engine mount bracket bolts (3).
Tighten
• Tighten the engine mount bracket bolts (3) to
100
N-m
(74
lb ft).
e
Tighten the engine mount bracket stud (2) to
87 N,m (64 lb ft).
Engine Mechanical -
3.8l 6-55
211604
50546
50546