Stabilizer Shaft Link Replacement - GMC chevrolet camaro 2000 Service Manual

Suspension
Notice: Refer to Fastener Notice in Cautions and
l
Notices.
4. Install the stabilizer shaft insulator bolt (1) and
clamp ntJts (2).
Tighten
Tighten the s.tabilizer shaft insulator clamp
nuts (2) to 24 N·m (18 lb ft).
5. Install the stabilizer shaft link. Refer to Stabilizer
Shaft Link Replacement. ·
Stabilizer Shaft Link Replacement
Removal Procedure
1.
Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
Information.
2. Remove the stabilizer shaft nut (1), bolt (3) and
bushings.
3.
Remove the stabilizer shaft spacer and bushings.
4.
Remove the stabilizer shaft bracket bolts
(2)
and bracket (5), if necessary.
5. Remove the stabilizer shaft bracket (5) from the
underbody pan (6), if necessary.
Installation Procedure
1. Align the stabilizer shaft bracket (5) to the
underbody pan (6).
Notice: Refer to Fastener Notice in Cautions and
Notices. ·
2.
Install the stabilizer shaft bracket
(5)
and bolts
(2).
Tighten
Tighten the stabilizer shaft bracket bolts (2) to
47 N·m (35 lb ft).
3. Install the stabilizer shaft spacer and bushings.
4. Install the stabilizer shaft bushings, bolt (3),
nut (1 ).
Tighten
Tighten the stabilizer shaft bolt (3) to
23
N-m
(17
lb ft).
5. Lower the vehicle.
Rear Suspension 3-53
490650
181244
181244