Steering
Hazard Warning Switch Replacement -
On Vehicle
Removal Procedure
Do not remove the steering column in order to replace
the hazard warning switch. Refer to Tilt Steering
Column Unit Repair.
1. Remove the bolt/screw (4).
2. Remove the button (3).
3. Remove the spring (2).
4. Remove the knob (1 ).
Installation Procedure
1. Install the knob (1).
2. Install the spring (2).
3. Install the button (3).
Notice: Refer to Fastener Notice in Cautions
and Notices.
4. Install the bolt/screw (4).
Tighten
Tighten the bolt/screw to 0.7 N-m (6 lb in).
Tilt Lever Replacement - On Vehicle
Removal Procedure
1. Firmly grip the tilt wheel release lever (3).
2. Twist the lever (3) counterclockwise.
Steering Wheel and Column - Tilt 2-69
290205
290205
290197