Repair Instructions; Ignition Switch Replacement - On Vehicle - GMC chervolet camaro 1999 Service Manual

2-66 Steering Wheel and Column - Tilt
2 1
290208
1
290273
Steering
Repair Instructions
Ignition Switch Replacement - On Vehicle
Removal Procedure
1. Remove the left-hand instrument panel insulator.
Refer to Insulator Replacement - IP (Left Side) in
Instrument Panel, Gages and Console.
2. Remove the instrument panel driver knee bolster
and deflector. Refer to Knee Bolster Replacement
in Instrument Panel, Gages and Console.
3. Disable the SIR system. Refer to Disabling the
SIR System in Supplemental Inflatable
Restraint System.
4. Ensure that the following components are in the
LOCK (1) position:
• The steering column lock
• The ignition cylinder
5. Remove the steering column upper support nuts
from the steering column support. Refer to
Steering Column Replacement.
6. Remove the steering column dash cover bolts.
7. Remove the lower column (8).
8. Remove the brake switches.
9. Remove the electrical connectors from the
dimmer switch (5).
10. Remove the electrical connectors from the
ignition switch (7).
11. Remove the bolts/screws (4).
12. Remove the dimmer switch (5).
13. Remove the bolVscrew (6).
14. Disconnect the ignition switch actuator rod (2).
15. Remove the ignition switch (7).
16. Remove the automatic transmission park lock
cable, if equipped.
(
(
(