CHAPTER 6 TROUBLESHOOTING
2.4.15 Position of the Deck (Left) Pickup Solenoid (SL8)
Use the screw [3] so that the distance from the pickup unit bottom face to the bushing bot-
tom edge of the A roller support plate is 49.5 ±0.5 mm when the plunger of the pickup re-
leasing solenoid is drawn (as occurring when [1] and [2] are operated as shown). (After ad-
justment, make sure that the distance between the paper face and the A roller is 2.5 ±0.5 mm
when the A roller is in UP position.)
[1]
[2]
[1]
[2]
A
[3]
View from A
F06-204-19
6-33
COPYRIGHT© 2001 CANON INC.
2000 2000 2000 2000
CANON iR105 REV.0 JULY 2001