Canon iR105 Service Manual page 648

P-TR-EXP
Use it to check the activation of the pre-transfer exposure lamp.
<Using the Mode>
1) Select the item, and press the OK key.
•
2) See that the pre-transfer exposure lamp remains ON for several seconds
LBL-PRNT
Use it to print out the service sheet.
<Using the Mode>
1) Place paper in the manual feed tray.
2) Select the item, and press the OK key.
•
•
PRE-EXP
Use it to check the activation of the pre-exposure lamp.
<Using the Mode>
1) Select the item, and press the OK key.
•
2) See that the pre-exposure lamp goes OFF automatically in several sec-
CL-ADJ
Use it to measure the clutch lock/unlock mechanism.
<Using the Mode>
1) Place 2 or more sheets of paper in the left deck and 1 sheet or more in
2) Select the item, and press the OK key.
• See that the 2 sheets are picked from the left deck and 1 sheet from the
3) When all sheets have been delivered, see that the machine indicates 'NG'
COPYRIGHT© 2001 CANON INC.
The pre-transfer exposure lamp goes ON.
and go OFF automatically.
When printing out the service sheet, be sure to use the manual feed
tray as the source of paper.
The service sheet is printed out.
Store the service sheet in the service book case behind the front cover.
See that the pre-exposure lamp goes ON.
onds.
the cassette 4 (if a Paper Deck is connected, 1 sheet in it); use A4/LTR
plain paper.
cassette 4 (1 sheet from the Paper Deck if connected).
to shows that the mechanism is normal; otherwise, it will indicate 'NG'.
2000 2000 2000 2000
COPIER>FUNCTION>MISC-P
CANON iR105 REV.0 JULY 2001
SERVICE MODE
S-87