Canon iR105 Service Manual page 129

b. Remove the Developing Cylinder Deceleration Clutch
1) Remove the high-voltage transformer
(DC) assembly. (See 8.4.7.c.)
2) Remove the flywheel.
3) Disconnect the 2 connectors [1], and
remove the 5 screws [2]; then, detach
the clutch mounting plate [3].
4) Remove the heater developing cylinder
deceleration clutch [1].
5) Remove the 6 E-rings [1], 2 bearings
[2], gear [3], and pin [4]; then, detach
the clutch [5].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 2 NEW FUNCTIONS
[1]
[2]
[1]
F02-508-28
[1]
F02-508-29
[5]
[1]
[2]
[1]
[4]
[1]
F02-508-30
[2] [3]
[2]
[1]
[2]
[1]
[1]
[3]
2-81