Display; Adjust - Canon iR105 Service Manual

3 FEEDER

3.1 DISPLAY

FEEDSIZE
Use it to indicate the size of an original detected by the ADF.

3.2 ADJUST

DOCST
Use it to adjust the original stop position when the ADF is used (original
tray pickup).
Memo
Range of
adjustment -30 to 30 (unit: 0.5 mm)
<Using the Mode>
1) Place an original in the original tray.
2) Select the item, check the setting, and press the OK key.
3) Press the OK key. The original will be picked up.
4) Open the ADF, and check the original stop position.
5) Press the OK key. The original will be delivered.
DOCST-M
Use it to adjust the original stop position when the ADF is used (manual
feed tray).
Range of
adjustment -30 to 30 (unit: 0.5 mm)
Using the Mode
Same as in FEEDER>ADJUST>DOCST.
COPYRIGHT© 2001 CANON INC.
• A higher value decreases the leading edge margin.
• The data is retained by the ADF controller PCB.
Feed
direction
Higher value Lower value
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
FEEDER>DISPLAY>ADJUST
Print image
F00-302-01
SERVICE MODE
S-123