Canon iR105 Service Manual page 630

<FEED-ADJ>
Use it to adjust the feeding system.
If you have replaced the DC controller PCB or cleared the RAM on the DC controller
PCB, be sure to enter the value indicated on the service sheet.
REGIST
Use it to adjust the timing at which the registration roller clutch goes ON.
Memo
Range of
adjustment -100 to 100 (unit: 0.1 mm)
ADJ-REFE
Use it to adjust the horizontal registration for re-pickup.
• If the image is displaced to the front, increase the value.
Range of
adjustment -100 to 100 (unit: 0.1 mm)
COPYRIGHT© 2001 CANON INC.
A higher value delays the timing at which the registration roller
clutch goes ON, thus decreasing the leading edge margin.
After setting the value, please turn the power switch off and then on.
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
SERVICE MODE
COPIER>ADJUST>FEED-ADJ
S-69