Canon iR105 Service Manual page 146

CHAPTER 2 NEW FUNCTIONS
b. Removing the Vertical Path Roller 2
1) Slide out the deck (right) and the caste
3/4.
2) Remove the 3 screws [1], and detach the
right lower front cover [2].
3) Disconnect the connector [1] and the
screw [2]; then, detach the guide plate
[3].
4) Remove the E-ring [1] at the front of
the roller shaft, and move the bearing
[2] toward the inside; then, detach the
vertical path roller 2 [3].
2-98
COPYRIGHT© 2001 CANON INC.
[1]
[1]
F02-606-22
[1]
F02-606-23
[1]
[2]
F02-606-24
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[1]
[2]
[2]
[3]
[3]