Canon iR105 Service Manual page 330

8) Insert a ruler [3] between the magnet
roller [1] and the scraper [2]; then,
move it from the front to the rear and
then from the rear to the front to breake
the caking toner.
9) Turn the magnet roller [1] to make sure
that the coating of waste toner is even.
If as follows, repeat step 8):
• The surface of the magnet roller is
coated in distinct lines.
• The surface has dents in some areas.
• The surface has lumps of toner.
10) Remove the cleaning blade from the
cleaning blade assembly. (See 5.8.2.b in
Chapter 2.)
11) Butt the edge of the cleaning blade [7]
that has been turned over or newly
mounted against the rear of the blade
cleaning plate [8].
When butting the blade, be sure
to force it so that there is no
gap.
COPYRIGHT© 2001 CANON INC.
CHAPTER 5 MAINTENANCE AND INSPECTION
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[2]
[1]
[2]
F05-402-07
[7]
[8]
F05-402-08
[3]
[3]
[1]
End butted.
5-21