Canon iR105 Service Manual page 730

(Example)
Serial number ABC00001
If a modified model and a part are no longer inter-
changeable, the serial number of copiers for which
the part can be used is shown in this column. If there
is no indication the part can be used with all models.
Connectors list. Part numbers of connectors used
in copiers and designated as Service Parts are listed
in numerical order by connector number.
For connectors of which the housing and contacts
are a single unit, there are no part numbers for the
contact.
Connectors that are mounted on PCBs are indicated
as "PCB" in the connector column. The part numbers
for these connectors should be looked for in the PCB
parts list.
List of Standard Fasteners. This specifications
list incorporates screws, nuts, washers and shim
washers, retaining rings, pins, and spacers that are used
in all copiers (including optional equipment).
Numerical Index. There is a Numerical Index at
the end of this catalog; it lists in numerical order every
Part Number contained in the Parts Lists. The
Numerical Index contains the following columns and
information.
(1) Part Number. The first column shows the
Part Number.
II -2
These are the
descriptive indicator.
COPYRIGHT C 2001 CANON INC.
(2) Figure and Key Number column. The second
column lists the Figure and Key Number for each
occurrence of the part in the illustrations.
HOW TO USE PART LISTS REV.0 APR. 1994