Canon iR105 Service Manual page 207

4) Remove the 2 screws [1], and slide out
the inverter fan [2].
When mounting the fan, be sure
that the direction of air current
is as indicated by the arrow.
5) Disconnect the connector [1], and de-
tach the inverter cooling fan [2].
i. Removing the Pre-Transfer Charging Assembly Fan (FM10)
1) Remove the process unit cover. (4
screws)
2) Remove the 2 screws [1], and discon-
nect the 2 connectors [2]; then, detach
the fan motor [3].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 2 NEW FUNCTIONS
[2]
[1]
F02-804-43
[1]
F02-804-44
[1]
[2]
F02-804-45
[1]
[2]
[3]
2-159