Area Around The Process Unit - Canon iR105 Service Manual

CHAPTER 2 NEW FUNCTIONS

5.8.4 Area Around the Process Unit

a. Removing the Pre-Transfer Exposure LED
1) Slide out the pre-transfer charging as-
sembly.
When placing the removed pre-
transfer charging assembly, be
sure to take care not to subject
the LED to impact.
2) Turn over the pre-transfer charging as-
sembly, and remove the 3 screws [1]
found on the bottom; then, detach the
LED cover [2].
3) Disconnect the connector [1], and re-
move the pre-transfer exposure LED
[2].
2-80
COPYRIGHT© 2001 CANON INC.
[1]
[2]
F02-508-26
[2]
F02-508-27
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[1]