Canon iR105 Service Manual page 685

SERVICE MODE
FEEDER>DISPLAY/ADJUST
LA-SPEED
Use it to adjust the original feed speed in ADF stream reading mode.
Memo
Range of
adjustment -30 to 30 (unit: 0.1%)
STRD-S
Use it to adjust the scanner stop position for stream reading mode (small-
size).
Range of
adjustment -25 to 25 (unit: 0.1 mm)
STRD-L
Use it to adjust the scanner stop position for stream reading mode (large-
size).
Range of
adjustment -25 to 25 (unit: 0.1 mm)
<Using the Mode>
Same as in FEEDER>ADJUST>STRD-S.
RVM-SPD
Use it to adjust the speed of the reversal motor.
Memo
Range of
adjustment -30 to 30 (unit: 0.1%)
S-124
• A higher value increases the speed.
• The data is retained by the ADF controller PCB.
Lower value
A higher value increases the speed.
COPYRIGHT© 2001 CANON INC.
Stream reading scanner stop
position
Higher value
Copyboard glass
F00-302-02
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001