Pickup Solenoid (Sl9/10) - Canon iR105 Service Manual

CHAPTER 6 TROUBLESHOOTING
2.4.16 Position of the Cassette 3/4 Pickup Solenoid (SL9/10)
Use the screw [3] so that the distance from the pickup unit bottom face of each cassette
holder and the bushing bottom edge of the A roller support plate is 35.5 ±0.5 mm when the
plunger of the pickup roller releasing solenoid is drawn (as occurring when [1] and [2] are
operated as shown). (After adjustment, make sure that the distance between the paper face
and the A roller is 2.5 ±0.5 mm when the A roller is in UP position.)
[2]
[2]
A
6-34
View from A
F06-204-20
COPYRIGHT© 2001 CANON INC.
[1]
[3]
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[1]