Fixing System; Points To Note When Mounting The Fixing Heater - Canon iR105 Service Manual

2.5 Fixing System

2.5.1 Points to Note When Mounting the Fixing Heater

1. Do not touch the heater surface.
2. For both heaters, mount so that the side with the longer heater harness is toward the
front.
3. Viewing from the front of the fixing assembly, mount the main heater on the right (for
200V model, 1150 W; for 208V model, 1220 W; for 230V model, 1185 W) and the sub
heater on the left (for 200V model, 565 W; for 208V model, 600 W; for 230V model,
645 W).
4. Viewing from the rear, connect the right side of the faston of the heater at the rear to the
main heater, and connect the top side to the sub heater.
Height of the Fixing Inlet Guide
5.8mm
(reference only)
Fixing screw
Do not loosen the fixing screw on the inlet guide, as you will have to adjust
the position of the inlet guide if you remove the inlet guide base. If you
must loosen it, be sure to adjust the position of the inlet guide afterward by
referring to the index on the fixing assembly.
COPYRIGHT© 2001 CANON INC.
F06-205-01
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 6 TROUBLESHOOTING
(reference only)
Fixing screw
5.8mm
6-37