Canon iR105 Service Manual page 82

CHAPTER 2 NEW FUNCTIONS
3) Disconnect the connector [1], remove
the screw [2], and detach the image
leading edge sensor [3].
f. Removing the Standard White Plate
1) Remove the copyboard glass. (See
2.9.1.a.)
2) Remove the small cover [1] for the stan-
dard white plate with a flat-blade screw-
driver.
3) Remove the 2 screws [1], and detach the
standard white plate cover [2].
2-34
[2]
COPYRIGHT© 2001 CANON INC.
F02-209-43
[1]
F02-209-44
[1]
[1]
F02-209-45
2000 2000 2000 2000
[2]
[1]
[3]
CANON iR105 REV.0 JULY 2001