Cassette - Canon iR105 Service Manual

CHAPTER 4 INSTALLATION

2.11 Cassette

No.
1
Perform this step if the user
is not planning to use Inch
papers.
Press the releasing buttons of the cassette
3 and 4, and slide out the cassettes to the
front; then, take out the packing material.
2 Set the side guide plate [1] of the cassette
(3/4) against the hole (A4/A3) identified
by the marking M.
Fit the non-inch block [2] that comes with
the machine into the following hole,
making sure that it will not be pushed up
from inside the cassette.
Hole with marking A [3]: STMT-R
Hole with marking H [4]: LTR-R
4-32
Work
COPYRIGHT© 2001 CANON INC.
Checks/remarks
[2]
[1]
F04-211-01
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[3]
[4]