Unpacking And Installation; Points To Note Before Starting The Work - Canon iR105 Service Manual

Hide thumbs Also See for iR105:

Table of Contents

CHAPTER 4 INSTALLATION

2 Unpacking and Installation

Go through the following before starting to install the machine:

1. If the machine is moved from a cold to warm place, it can develop con-

densation in the form of droplets of water on its metal surfaces.

Use of the machine while it suffers from condensation can lead to image

faults. If the machine has been moved from a cold to warm place, be sure

to leave it for 1 hour or more without unpacking so that it becomes fully

used to the new place.

2. If stairs are used to move the machine into or out of the site of installa-

tion, keep the following in mind:

a. Take out the ADF, fixing/feeding assembly, holding tray assembly, and

b. When lifting the machine, do not use the grips on the pickup assembly/

3. Shift up the 2 adjusters (front) found on the bottom of the machine to be

sure that they are unlocked. The adjusters can slip out of the bottom of

the machine because of vibration during transportation. Take care not to

4. Be sure to work as a group of three or more. When removing the pad, in

particular, one must hold the rear grip and one the front grip, while the

other removes the pad.

5. Be sure to remove the accessories (side paper deck, finisher, paper fold-

ing unit) when moving the machine into or out of the site of installation

to prevent damage.

copy paper, and carry them separately from the main body.

delivery assembly. Instead, be sure to support the machine at four cor-

ners of its bottom.

2000 2000 2000 2000

CANON iR105 REV.0 JULY 2001

Table of Contents