Canon iR105 Service Manual page 676

<NETWORK>
Use it to check the network-related connections.
PING
Use it to check the connection between the copier and the network (TCP/IP
only).
<Using the Mode>
(at time of installation and connection fault)
1) Turn off the main power switch.
2) Connect the network cable, and turn on the main power switch.
3) Inform the user's system administrator that the copier has been in-
4) Inform the system administrator that you are going to check the net-
COPYRIGHT© 2001 CANON INC.
Use to check the connection to the network at time of installation and
when a fault occurs when a connection is made to the network.
<NETWORK>
Result (OK/NG)
stalled, and ask him/her to set up the network.
work connection, and obtain the remote address (IP address of a PC ter-
minal note user network) from which PING is entered.
2000 2000 2000 2000
< 1/1 >
0 . 0 .
F00-206-11
CANON iR105 REV.0 JULY 2001
SERVICE MODE
COPIER>TEST>NETWORK
<READY >
0 . 0
IP address input
+/- OK
S-115