Canon iR105 Service Manual page 83

4) Remove the 4 screws [1], and detach the
standard white plate [2].
g. When Replacing the Standard White Plate
1) Check to be sure that the Execute/Memory lamp in the control panel is OFF, and turn off
the main power switch.
2) Disconnect the power plug from the power outlet.
The machine remains powered as long as its power plug is connected. Be
sure to disconnect the power plug from the power outlet.
3) Replace the standard white plate.
4) Assemble the machine, and connect the power plug; then, turn on the main power
switch.
5) Execute the following in service mode in sequence:
1. COPIER>FUNCTION>CCD>CCD-ADJ
2. COPIER>FUNCTION>CCD>LUT-ADJ
6) Inplement the service mode described below to the service sheet which is to be kept in
the service log book case.
COPIER>FUNCTION>MISC-P>LBL-PRNT
7) Turn off and then on the main power switch.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 2 NEW FUNCTIONS
[2]
[1]
[1]
F02-209-46
2-35