Canon iR105 Service Manual page 230

CHAPTER 2 NEW FUNCTIONS
j. Removing the Bi-centronics PCB
1) Remove the rear cover. (See 8.4.1.e.)
2) Remove the rear upper cover (2 screws),
left lower cover (2 screw), left upper
cover (9 screws), and upper left cover (3
screws).
3) Disconnect the 3 connectors [1].
4) Remove the screw [1], and detach the
harness fixing plate [2].
5) Remove the 2 screws [1], and detach the
positioning pin [2].
6) Remove the 5 screws [3], and detach the
Bi-centronics PCB unit [4].
2-182
[3]
COPYRIGHT© 2001 CANON INC.
F02-804-94
[1]
F02-804-95
[4] [3]
F02-804-96
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[1]
[1]
[2]
[3]
[1]
[2]