Drive Assembly - Canon iR105 Service Manual

CHAPTER 2 NEW FUNCTIONS
s. Removing the Separation Heat Discharge Fan (FM20)
1) Remove the rear cover. (See 8.4.1.e.)
2) Disconnect the connector, and remove
the 2 screws [2]; then, detach the sepa-
ration heat discharge fan [3].

8.4.4 Drive Assembly

a. Removing the Drive Assembly
1) Remove the HV-DC PCB. (See 8.4.7.c.)
2) Remove the 2 screws [1], and detach the
flywheel [2].
3) Loosen the 2 screws [1] (w/ hex hole),
and remove the binding screw [2] (w/
spring); then, detach the gear [3] of the
drum shaft.
When removing the screw from
the drum shaft gear, be sure to
pay attention to the direction of
gear rotation, i.e., turn it coun-
terclockwise.
2-166
COPYRIGHT© 2001 CANON INC.
[1]
[2]
[3]
F02-804-62
[1]
[2]
F02-804-63
[1]
[1]
F02-804-64
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[2]
[2]
[3]