Canon iR105 Service Manual page 302

No.
7 Remove the 2 screws [1], and detach the
face plate [2] from the card reader base
assembly [3].
(You will use the removed parts later.)
8 Remove the 2 screws that remain on the
top of the card reader [1].
Mount the card reader [2] using the 2
removed screws [3] and the 2 screws [4]
used to keep the face plate in place. (At
this time, be sure to route the harness [5]
and the grounding wire [6] under the card
reader as indicated.)
Route the harness through the edge saddle
[7].
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[2]
[1]
F04-401-04
[3]
[5]
[6]
[7]
[1]
F04-401-05
[1]
[3]
[2]
[4]
4-43