Manual Feed Tray Assembly - Canon iR105 Service Manual

CHAPTER 2 NEW FUNCTIONS

6.6.1 Manual Feed Tray Assembly

a. Removing the Manual Feed Tray Unit
1) Remove the control panel unit. (See
8.4.2.a.)
2) Remove the upper right cover.
3) Open the manual feed tray unit [1].
4) Remove the screw [2], and detach the
door tape [3] from the machine side.
5) Remove the screw [4], and detach the
connector cover [5].
6) Disconnect the connector [6], and de-
tach the manual feed tray unit [1] up-
ward while it is kept open at about 90°.
b. Fitting the Side Guide Timing Belt for the Manual Feed Tray Assembly
1) Butt the rack plate [1] of the manual
feed tray against section A (in open
state).
2) Move the slide volume [2] in the direc-
tion of B, and fit the timing belt [3] to
the pulley [4] and the pulley [5].
2-90
COPYRIGHT© 2001 CANON INC.
[2] [3]
[5] [6]
[4]
F02-606-01
[3]
[4]
[1]
B
[2]
F02-606-02
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[1]
[5]
A