Right Deck Pickup Roller Releasing Solenoid (Sl7); Adjusting The Position Of The Left Deck Pickup Solenoid (Sl7) - Canon iR5000i Service Manual

CHAPTER 7 EXTERNALS AND CONTROLS

5.8.3 Right Deck Pickup Roller Releasing Solenoid (SL7)

1) Remove the high-voltage power supply
PCB.
2) Remove the screw [1], and disconnect
the connector [2]; then, detach the
pickup roller releasing solenoid [3].

5.8.4 Adjusting the Position of the Left Deck Pickup Solenoid (SL7)

When replacing the solenoid on its own,
be sure to mount it in its initial position.
(Take note of the position of the fixing
screw [2] before detaching the left deck
pickup solenoid from the support plate [1].
Or, mark the position of the solenoid on the
support plate with a scriber.)
7-48 P
COPYRIGHT © 2001 CANON INC.
[1]
F07-508-04
[2]
F07-508-05
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
[3] [2]
[1]