Canon iR105 Service Manual page 143

b. Removing the Right Deck Feed Sensor/Right Deck Pickup Sensor
1) Remove the front deck (right) pickup
assembly.
2) Remove the guide plate [1].
3) Remove the screw [1], and detach the
stack eliminator [2].
4) Remove the 2 screws [3], and detach the
pickup assembly sensor base [4].
5) Disconnect the connector [1] (1 pc.
each), and free the claw; then, detach
the right deck feed sensor [2] and the
right deck pickup sensor [3].
When removing the scanner
sensor, be sure to remove the
paint used to lock the claw in
place in advance to prevent
breaking the claw. When mount-
ing it, be sure the claw is not
displaced or the sensor is not
disoriented.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 2 NEW FUNCTIONS
F02-606-14
[2]
[1]
F02-606-15
[2]
[3]
F02-606-16
[1]
[3]
[4]
[3]
[1]
2-95