Canon iR105 Service Manual page 277

CHAPTER 4 INSTALLATION
No.
12 With the lock released, fit the pre-transfer
charging assembly, and connect the
connector.
• Check to make sure that the
solvent is fully dry.
• Check to make sure that the
one-way arm [1] of the pre-
transfer charging assembly is
on the eccentric cam [2].
13 Mount the primary charging assembly
cover and the pre-transfer charging
assembly cover with a screw (1 pc. each).
14 Close the front cover.
4-18
Work
COPYRIGHT© 2001 CANON INC.
Checks/remarks
[2]
F04-205-11
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[1]