Canon iR105 Service Manual page 166

CHAPTER 2 NEW FUNCTIONS
3) Remove the faston [1], and remove the
2 screws [2]; then, detach the electrode
assembly [3] and the thermal switch
holder [4].
4) Remove the 4 screws [1], and detach the
thermal switch unit [2].
d. Mounting the Thermal Switch Unit
• When mounting the thermal
switch [1], be sure that it is in
contact with the fixing roller
[2] as shown.
• The thermal switch must be
replaced as the thermal switch
unit.
• Do not use again the thermal
switch wolse contact point
become open.
2-118
COPYRIGHT© 2001 CANON INC.
[3] [2]
F02-709-06
[1] [2]
F02-709-07
[2]
F02-709-08
2000 2000 2000 2000
[1] [4] [2]
[1]
[1]
CANON iR105 REV.0 JULY 2001