Canon iR105 Service Manual page 268

No.
8 Take out the two slope plates [1] from the
center of the skid [2].
9 Detach the 2 pins taped to the slope
plates.
Turn over the slope plates [1], and match
the pins [2] hole in the skid and the pin
hole in the slope plate; then, fit the pin [2]
(1 pc. each).
Holding the grips (front, rear) on the
delivery side of the copier, slide the copier
down the slope plates to move it off the
skid.
10 For the cardboard box that comes with the
machine, take out the parts and the
attachments. Check to make sure that
none of the foregoing items is missing.
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[2]
F04-202-08
[2]
F04-202-09
[1]
[1]
4-9