CHAPTER 6 TROUBLESHOOTING
4.1.43 E400
Communication cable
1) Is the connection of the communication cable between ADF and the
NO:
ADF controller PCB
2) Try replacing the ADF controller PCB. Is the problem corrected?
YES: End.
4.1.44 E402
----------
1) Set the bits of the DIP switch (SW1) on the ADF controller PCB as
YES: Go to step 3.
6-108
machine normal?
Correct it.
follows:
Does the belt motor (M2) rotate when the push switch (SW2) is
pressed? (To stop, press the push switch (SW2) once again.)
COPYRIGHT© 2001 CANON INC.
F06-401-06
2000 2000 2000 2000
CANON iR105 REV.0 JULY 2001