Canon iR105 Service Manual page 275

CHAPTER 4 INSTALLATION
No.
6 Mount the transfer/separation charging
assembly front cover with a screw.
Push in the fixing/feeding assembly inside
the machine, and shift the fixing/feeding
assembly releasing lever [1] to SET
position.
7 Remove the screw [1], and detach the
primary charging assembly front cover
[2].
8 Disconnect the connector [1], and release
the locking lever [2] of the primary
charging assembly; then, take out the
charging assembly [3].
Using alcohol, clean the primary charging
wire and grid wire.
Do not mount it until the
solvent is fully dry. Wait
REF.
until later.
4-16
Work
COPYRIGHT© 2001 CANON INC.
Checks/remarks
F04-205-06
[2]
F04-205-07
[1]
[2]
F04-205-08
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
[1]
[1]
[3]