Canon iR105 Service Manual page 708

Hide thumbs Also See for iR105:

Table of Contents

• Paper Deck Folding Unit (E518)

The folder motor (M14) is faulty. The folder driver PCB is faulty.

00FF The clocks from the folder motor drop below a specific value while

• Finisher (from E530 to E595)

The rear aligning plate home position sensor (PI9) is faulty. The rear align-

ment motor (M5) is faulty. The finisher controller PCB is faulty.

0001 The aligning plate does not return to home position when the rear

0002 The aligning plate does not leave home position when the rear

The stapling home position sensor (inside the stapler) is faulty. The stapler

motor (M11) is faulty. The swing guide safety switch (MSW2) is faulty.

The stapler safety switch (front; MSW6) is faulty. The stapler safety switch

(rear; MSW7) is faulty. The finisher controller PCB is faulty.

0001 The stapler does not return to stapling home position when the sta-

0002 The stapler does not leave stapling home position when the stapler

The stapler shift home position sensor (PI16) is faulty. The stapler shift mo-

tor (M10) is faulty. The swing guide safety switch (MSW2) is faulty. The

stapler safety switch (front; MSW6) is faulty. The stapler safety switch

(rear; MSW7) is faulty. The finisher controller PCB is faulty.

0001 The stapler does not return to stapler shift home position when the

0002 The stapler does not leave stapler shift home position when the sta-

the motor is in operation.

aligning plate motor is driven for a specific period of time.

pler motor is driven for 0.5 sec.

motor is driven for 0.5 sec.

stapler shift motor is driven for 4 sec.

pler shift motor is driven for 4 sec.

2000 2000 2000 2000

CANON iR105 REV.0 JULY 2001

Chapters

Table of Contents