Canon iR105 Service Manual page 295

CHAPTER 4 INSTALLATION
No.
13 Start service mode.
Make the following selections:
COPIER>FUNCTION>INSTALL>TONER-
S.
See that the following message has
appeared: 'Check the Developer'.
Check to see that the developing assembly
and the developing assembly locking plate
are correctly mounted; then, press the OK
key.
The machine starts to supply toner. (about
10 min; progress shown on display by
count-down)
At the end, make the following selections
to generate 2 A3 solid black copies to
ensure stable images:
COPIER>TEST>PG>PG_PICK.
Enter the number of the source of paper
containing A3 paper, and press the OK
key. ('3' for cassette 3, or '4' for cassette
4)
Make the following selections:
COPIER>TEST>PG>TYPE.
Enter '6', and press the OK key. ('6' for
solid black; PG-TYPE6)
Preset the Start key twice to generate 2
solid black copies (A3).
At the end, press the Reset key twice to
end service mode.
4-36
Work
↓
↓
↓
↓
↓
↓
↓
↓
↓
COPYRIGHT© 2001 CANON INC.
Checks/remarks
Starting Service mode
1) Press the User Mode key.
2) Press the '2' and '8' keys at the same time on
the keypad.
3) Press the User Mode key.
Never turn off the power while the
machine is in operation.
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001