Canon iR105 Service Manual page 716

• Copier (from E601 to E830)
E601
Main cause The wiring is faulty (short circuit, open circuit). The hard disk drive is
faulty. The DC controller PCB is faulty. The main controller PCB is faulty.
Condition
0000 The main controller PCB detects a fault in control information for
E602
Main cause The wiring is faulty (short circuit, open circuit, connector disconnection).
The installed system file is faulty. The hard disk drive is faulty. The main
controller PCB is faulty.
Condition
0001 A fault in the mounting of the hard disk is detected when the boot
0002 No appropriate system is found on the hard disk when the boot
0003 A sector error occurs on the hard disk when the boot ROM starts
E604
Main cause The image memory is faulty. The main controller PCB is faulty.
Condition
0000 A fault exists in the image memory.
E605
Main cause The battery for image memory is faulty. The main controller PCB is faulty.
Condition
0000 A fault is detected in the voltage of the battery for the image
E674
Main cause The fax board is faulty.
Condition
0000 An error exists on the FAX board.
COPYRIGHT© 2001 CANON INC.
image transfer between the main controller PCB and the hard disk
drive. Or, the DC controller PCB detects a fault in control informa-
tion for image transfer between main controller PCB and DC con-
troller PCB.
ROM starts up the system on the hard disk.
ROM tries to start up the system on the hard disk.
up the system on the hard disk.
memory.
2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001
ERROR CODE
E-25